The fully automatic reciprocating car washing machine is generally referred to as a reciprocating car washing machine in international practice. It is an important type of fully automatic car washing machine and a commonly used car washing machine. Below is a brief introduction to this equipment:
It is also known as a gantry car washing machine in China. It was invented by Americans. The commercialization was achieved by the Japanese.
The fully automatic reciprocating car washing machine is a car washing device that moves back and forth according to the vehicle model while the car is parked in a fixed position without moving. Implementation: Automatic chassis washing (generally do not use automatic chassis washing, as some cars with poor quality may damage the car horn), automatic spray computer car washing machine specially used car wash liquid and water wax, automatic imitation brushing, automatic imitation air drying. A dirty car goes in and a clean car comes out, and the washing time is generally about 3 minutes. Suitable for car beauty shops and other places with less than 120 vehicles for daily washing.
Advantages: It is conducive to improving the overall image of the store and is a true fully automatic car washing machine.
Disadvantage: Large venue requirements
The technology of fully automatic reciprocating car washing machines is currently mainly divided into two categories: one is the PLC technology commonly used in domestic car washing machines, and the other is the typical CPU (microcontroller) technology used in imported car washing machines. PLC technology is relatively backward, relying mainly on current sensing technology and using brushes to sense the shape of the car body. CPU technology relies on computer photoelectric sensors, and car wash machines scan cars for higher safety performance. It is also a true computerized car wash machine.
Brush of fully automatic reciprocating car washing machine: Nowadays, many people say that reciprocating car washing machines damage the car paint. In fact, when the car is in motion and rubs against the air, a lot of dust will adhere to the surface of the car paint. Over time, a film will form, which will cause continuous damage to the car paint. High pressure water cannot wash off this film. A car washing machine with a brush can evenly remove this film, and the current brushes are made of high composite materials, which will not cause damage to the car paint.
The hardware facilities of the fully automatic reciprocating car washing machine are important, not just the motor or the brush as we mentioned. But it's the framework of a computer car wash machine. Because the walking route of the machine requires horizontal movement during operation. Therefore, strict requirements must be placed on the framework for producing gantry reciprocating computerized car washing machines.
A horizontal framework is necessary to ensure the service life of the gantry reciprocating computerized car washing machine when walking on a horizontal ground. The manually welded frame generally cannot meet the requirement of an error of no more than 2 millimeters. The floor of a typical car wash machine is made by consumers themselves. We must have strict requirements. Otherwise, a good computer car wash machine cannot fully utilize its significant advantages. On the contrary, problems often arise.
The installation area of a fully automatic reciprocating car washing machine is relatively lower compared to a tunnel machine.
扫一扫，查看手机站 