Self service car washing machines are an important way of operating car washing machines and have significant applications and developments abroad. Nowadays, the development in China is also relatively rapid. Let's learn about the characteristics of self-service car washing machines:
1. Water outlet system
Adopting foreign technology products, the multi liquid proportional splitter has achieved the function of dual water discharge with one gun. One is clear water, and the other is steam thermal decomposition. Combined with water vapor, convenient for operation.
2. Billing system
Billing method, 1. Inductive IC card; 2. Coin dispenser.
The advantage of using an induction IC card is that it avoids the phenomenon of poor contact caused by prolonged use of contact IC cards and requires a higher usage environment. Inductive IC cards are less affected by the environment and have a low failure rate.
3. Coin system
A coin acceptor is a three-dimensional coin acceptor that integrates quality, volume, and light sensitivity. It has high security, does not consume coins, and has high sensitivity in identifying counterfeit money.
4. Chassis shell
The car washing machine is made of 1.5mm thick galvanized steel plate, which is safer and more sturdy. The machine does not rust, the paint is not easy to peel off, and it is corrosion-resistant.
5. Fault self checking system
When the machine malfunctions during operation, the control system can perform a fault self check on the machine and convert the inspection results into corresponding fault codes, which are displayed on the control panel. By referring to the fault code comparison table in the manual, it is easy to identify the cause of the fault and eliminate it.
6. Antifreeze system
1. Temperature control system: Dual temperature control system. The internal temperature of the machine is controlled within a range, rather than a specific temperature value, such as (5 ° C~10 ° C), which can be adjusted according to different cities, seasons, and environments (1~60 degrees). Input voltage 12V, output voltage 12V.
2. Heating system: Two heaters. If one heater has a problem, the other can start immediately within 5 seconds to prevent unexpected events from happening.
3. Insulation material:
I. Internal insulation. The inside of the chassis is covered with high-density polyethylene compression board and aluminum foil board (the function of the aluminum foil board is to refract infrared radiation back and store heat)
II. The external pipeline insulation uses heating belts. Its width is 25px and its thickness is 7.5px.
7. Water storage system
The machine is equipped with a built-in water storage system to prevent the car washing machine from malfunctioning due to municipal water supply interruption.
8. Anti theft system
The chassis adopts the domestic T-shaped anti pry lock, which adopts a threaded rotating structure, durable and safe. There are four fixing screws at the bottom of the machine, which have strong anti-theft properties.
9. Display system
Adopting a three digit display function, with dual display of time and amount. Equipped with automatic voice prompts and background music.
10. Other functions
It can be combined with multiple functions, such as air gun function, to meet the needs of different consumers. Reserve machine upgrade space for future machine upgrades and improvements.
Self service car washing machines can be widely used in underground parking lots, gas stations, residential parking lots, car beauty shops, and other occasions.
扫一扫，查看手机站 